What Size BOB Trailer Nutz Do I Need?

Hello readers! This being my first venture out into the blog-o-sphere, I figure introductions are in order. Casey Clark here, Wandertec product developer and friendly neighborhood bicycle mechanic, at your service. Nice to meet you.

We received a call from a fellow the other day who was having a little trouble figuring out how to attach a BOB trailer to his bike, which has a solid, bolt-on rear axle. In fact, we’ve been getting quite a few calls and emails on the subject lately, which tells me that we’ve got a ‘teachable moment’ on our hands. I’m going to take off my Product Developer Hat and put on my Friendly Neighborhood Bicycle Mechanic Hat for a minute here and see if I can de-mystify the topic.

First off, the basics. A solid axle attaches to the frame via axle nuts, as opposed to a hollow axle with a quick release skewer. If you’ve got a hub with a solid axle, and you want to tow a BOB trailer, you obviously can’t use the standard BOB Trailer quick release skewer hitch, so what you need are some BOB trailer Nutz.


There are four sizes of BOB nutz available. To find out which one fits your bike, you need to determine your hub axle diameter and thread pitch. (If you’re not savvy to thread concepts yet, read this page on the Park Tools website). Measuring axle diameter is easy, set your calipers around the axle threads and get a reading. This is the major diameter, which is slightly smaller than the listed size. For example, a 10mm axle may measure at 9.8mm.

Thread pitch, or the frequency of threads along the length of the axle, is a little trickier to measure Like the article says, the best tool to use is a pitch gauge, but in a pinch you can use high quality calipers. Set your calipers for exactly one inch, and count how many thread crests fit between the caliper jaws. This is your threads per inch (tpi) measurement, which all SAE (a.k.a. “standard”, Imperial, English) axles use. ISO (metric) threaded axles don’t use a tpi measurement, but rather a crest-to-crest measurement. As far as hub axles go, the threads are always one millimeter apart, which would give you 25.4 tpi. Be careful differentiating between 10 x 26tpi and 10 x 1, they look very, very similar, but are not compatible. Generally speaking, 10 x 1 axles are only found on Campagnolo hubs and a few other brands that produced Campy copies.

This chart shows the most common rear axle sizes, the kind of hubs they are commonly found in, and the corresponding BOB Nuts part number as listed at Bike Trailer Shop. I lifted most of the info from the late Sheldon Brown. Remember, this is more of a rough guide than a comprehensive chart.


Axle dia./pitch Common Applications B.O.B. Nutz model


3/8′ x 24 tpi Wald, Skyway, coaster brake hubs, and hubs on many dept. store bikes. 3/8′ x 24 tpi


3/8′ x 26 tpi BMX, tandem, old Shimano XT (freewheel), and hubs on many dept. store bikes. 3/8′ x 26 tpi


9.5mm x 26 tpi (3/8′ x 26 and 9.5mm x 26 are generally interchangeable) 3/8′ x 26 tpi


10mm x 1 (25.4 tpi) Japanese Hubs (Suntour, Shimano, etc.), Miche 10mm x 1mm


10mm x 26 tpi Campagnolo, Campagnolo copies (Avocet, Ofmega, etc.) N/A


10.3 x 26 tpi Aka fg 10.3, a German standard, found on some older Sturmey Archer hubs 10.5 x 26 tpi


10.5 x 26 tpi Aka fg 10.5, a German standard, found on some older Sachs hubs 10.5 x 26 tpi

Once you have the right BOB Nutz, use them to replace the stock nuts, hitch up your trailer, and you’re ready to ride.


Well, I hope that clears up some of the confusion. If you have any more questions, you can always contact us directly, or ask your favorite local bike shop.

If we’ve left anything out please let us know in the comments below and we’ll update this post regularly to include it with any other new findings that we come across.

Thanks for reading, and thanks for riding bikes.

Sign up for our Adventure-Packed Newsletter

Get our latest touring, commuting and family cycling posts and sales delivered to your inbox!
  • This field is for validation purposes and should be left unchanged.

0 thoughts on “What Size BOB Trailer Nutz Do I Need?”

  1. […] a new category “Very Wise Bike Mechanic Wisdom” with a post with an in-depth post about sizing BOB Trailer Nutz to solid axles. We’ll be posting more of our experiences with bike trailers on the BikeShopHub.com, […]

  2. Patrick says:

    I would like to know what rear rack is in the above picture on you blog?
    I have a 700c wheel,with 40mm tires and would like to use a BOB trailer,with nutz,alng with a rear rack /panniers. Rear racks I’ve looked at are Surly’s Nice as well as Tubus.

  3. josh says:

    I’m not sure what the rack in the photo is, but I can say that the Tubus Vega is an excellent choice of rear rack if you intend to use a BOB as well. Surly racks would likely have clearance issues with BOB Trailers.


  4. Glenn says:

    Bikes with internal gears such as the SRAM 3-speed hub are not adaptable to the screw-on nuts. Are there BOB Nutz that can be fastened to other holes on the rear of the frame? How do you determine the correct spread for the BOB fork?

    1. josh says:

      It is possible to use the non skewer side from 2 BOB quick releases to mount to lower rack/fender eyelets on the frame. These use the M5 pitch thread as do most rack/fender eyelets. You can run an M5 bolt out from the eyelet and then turn the non-skewer side of the BOB quick release onto the bolt.

      As far as I know, this method hasn’t been thoroughly tested, and will likely void both your BOB trailer and bicycle frames warranty. It also could put quite a bit of stress on your rack/fender eyelets and may cause them or other parts of your bike frame to become stressed and possibly fail.

  5. David Leon says:

    Wanting to use my trailer with my single-speed commuter. This bike uses a White Industries ENO eccentric rear hub which uses a M6 (?) bolt (allen head bolt threads into hub). Would you consider making a small run of these ? (Alternately if you made a version of the nutz which was tapped for M6 then I could thread in a stud instead).

    Any suggestions regarding how I can get my trailer to work with this hub would be very welcome. Otherwise I’m gonna have to buy a machinist a lot of beer (nothing good ever comes of that). Thanks.

  6. Josh Lipton says:


    The solution that I mentioned for Glenn in using the 2 BOB quick releases (non-skewer side nut) might be applied here as well. The M5 thread would have to be drilled and tapped. I have not attempted this and cannot verify it as a solution, just a suggestion of something that might be more cost effective than hiring a machinist.

  7. Ian Nunn says:

    I’m looking for a sachs 10.5mm 26tpi axle nut. Do you have any and how can i buy a couple?

  8. jeff krienke says:

    Do you guys make adaptors so you can use it with thru axles on mtb’s?

  9. Mike Blaire says:

    I have a Bionx electric bike motor on my bike. I would like to pull a Bob trailer but I do not know the size of my solid axle or the thread pitch. Wondering if you can help?

    1. Josh Lipton says:

      If you can not determine the size of the rear axle through the hub manufacturer’s brochure or online information you can determine axle size by removing one of the nuts. Take the nut into a hardware store or local bike shop. Determine its size by checking which size axle (or bolt) it will thread onto.

Leave a comment.

Your email address will not be published. Required fields are marked *


20% off ALL Ortlieb Bag Closeouts! Shop Closeouts

Scroll to Top