Ortlieb QL3 fixing clamps 12+14 mm

$5.99

In stock

SKU: ORTFIXC Category: Tag:
Global Trade Item Number (GTIN) : 4013051034333

1 pair QL3 fastening buckles 12-14 mm for all Ortlieb QL3 models.


Overview

1 pair QL3 fastening buckles 12-14 mm for all Ortlieb QL3 models.

Features

  • two screws / two buckles / 4 Reduction piece

Specs

  • H x W x D: 6cm x 0.17cm x 3cm / 2.5″ x 0.07″ x 1″
  • Weight: 12g / 0.42oz

Warranty

All Ortlieb Bags are backed by a 5-year warranty against defects in material and manufacturing.

Please see our Warranty page for the details of our warranty process.


Customer Reviews
4.0 Based on 2 Reviews
5 ★
50% 
1
4 ★
0% 
0
3 ★
50% 
1
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JR
05/31/2020
Jayne R.
CA CA

Fast Delivery

One of the fastest deliveries for bicycle parts.

MW
07/23/2017
Morgan W.
San José, California

Might need modification for 14mm rack.

As they come, the straps with the captive nut are too short to reach the end of the machine screw without being at an angle. The threads *might* catch the nut, but then will try to cross-thread. I ended up cutting off the "captive" part that holds the nut with a carpet knife and ******** the strap on with no nut for a bit. There's enough of an edge on the hole through the plastic to catch a groove between threads. A few turns to cinch the strap down so a bit of the end of the screw is showing, then the nut could be threaded on properly and ******* down tight. This only worked because I was able to get a little (8mm?) spanner through to hold the nut while tightening the screw. If I hadn't had clearance, I could have taken the rack off the bike to mount the adapters without the wheel (and fender) in the way.